Derived maker summary
Tier IIIThe British Bench editorial classification — Derived directory summary — all eligible current families share this published physical tierClemence Watches
Scottish independent watch company designing and hand-assembling current Munro and Photic MKII watches in Britain.
Editorial classification
The British Bench editorial classification
The British Bench records documented facts about where design, development, component manufacture, assembly, regulation, testing, quality control and related work take place, then applies its own editorial provenance methodology to those facts. A tier is an editorial classification only. It does not determine whether a watch, company or claim is legally British or British-made; assess compliance with origin, advertising or consumer-protection rules; certify or approve a product or maker; or measure quality, value, legitimacy or company nationality. A higher tier confers no legal status, certification, approval or endorsement. A lower tier does not mean a less-British company, a worse watch, misconduct or an improper or unlawful origin claim.
Headline decision
Tier III
All 2 current production families share this published tier.
- All 2 current production families share this published tier.
- Tier III is a directory summary derived from the current family classifications below; it does not transfer a physical tier between watches.
Documented factual findings
What happens within the qualifying territory
Published operations are shown here; the route cards identify how The British Bench interprets them for each physical tier.
British hand assembly of Munro and Photic MKII
Clemence states that Munro and Photic MKII are assembled by hand in Britain.
Britain; exact current watchmaker/site not publicly itemised on the reviewed model pagesClemence current-family testing and inspection in the British route
Clemence documents testing/inspection of current watches in its British-led production route; the complete final-test checklist is not public.
British production route; exact test station and sequence not publicly itemisedDocumented factual findings
What is made or completed elsewhere
Documented imported components and international specialist work remain visible beside domestic operations.
No international operation is currently established in the published record.
Unknown and unresolved
What the available evidence does not establish
These fields remain Unknown rather than being converted into a negative fact, inferred location or assumed production route.
Three-position regulation for Munro and Photic MKII
Clemence publishes three-position regulation to a minimum +/-12 seconds/day; the post-casing sequence and regulation location require confirmation.
Not publicly stated at sufficient process depthRoute-level decisions
Where the physical classification changes
The maker summary never replaces these model- and collection-level decisions.
Photic MKII
Collection · Provisional — strong evidence with defined gaps
The British Bench’s editorial interpretation
- Current first-party material states that this Clemence route is assembled by hand in Britain rather than imported as a completed watch head.
- Clemence publishes three-position regulation to a minimum ±12 seconds/day for the Miyota 9039 route and documents British-route testing and inspection/final testing.
- The evidence supports a substantive British assembly, regulation and testing route; the exact post-casing acceptance sequence, corrective recheck and release traceability remain defined gaps, so the classification is Provisional rather than Confirmed.
International work
- The route uses a Japanese Miyota 9039 movement; no qualifying British manufacture of a principal component family is established by the reviewed current evidence.
Why the next tier is not met
- Tier II is not supported because the reviewed current evidence does not establish repeatable British manufacture of a qualifying principal component family such as the movement/substantial mechanism, case, dial or complete hand set.
Evidence gaps
- The public record states three-position regulation to a minimum ±12 seconds/day but does not explicitly establish that this acceptance measurement occurs after final casing in Britain.
- The corrective regulation/rework or controlled rejection rule and mandatory timing recheck after intervention are not publicly itemised.
- Testing/inspection and final-testing language are now public, but the complete completed-watch functional checklist and formal final pass/fail release authority are not.
- Serial-number or controlled-batch final-QC traceability is not publicly stated; production pressure-test method/scope/location also remains unstated for the 150m/200m families.
Documented factual findings attached to this route
Clemence states that Munro and Photic MKII are assembled by hand in Britain.
Britain; exact current watchmaker/site not publicly itemised on the reviewed model pagesClemence publishes three-position regulation to a minimum +/-12 seconds/day; the post-casing sequence and regulation location require confirmation.
Not publicly stated at sufficient process depthClemence documents testing/inspection of current watches in its British-led production route; the complete final-test checklist is not public.
British production route; exact test station and sequence not publicly itemisedIdentifiable evidence supporting this route
Munro
Collection · Provisional — strong evidence with defined gaps
The British Bench’s editorial interpretation
- Current first-party material states that this Clemence route is assembled by hand in Britain rather than imported as a completed watch head.
- Clemence publishes three-position regulation to a minimum ±12 seconds/day for the Miyota 9039 route and documents British-route testing and inspection/final testing.
- The evidence supports a substantive British assembly, regulation and testing route; the exact post-casing acceptance sequence, corrective recheck and release traceability remain defined gaps, so the classification is Provisional rather than Confirmed.
International work
- The route uses a Japanese Miyota 9039 movement; no qualifying British manufacture of a principal component family is established by the reviewed current evidence.
Why the next tier is not met
- Tier II is not supported because the reviewed current evidence does not establish repeatable British manufacture of a qualifying principal component family such as the movement/substantial mechanism, case, dial or complete hand set.
Evidence gaps
- The public record states three-position regulation to a minimum ±12 seconds/day but does not explicitly establish that this acceptance measurement occurs after final casing in Britain.
- The corrective regulation/rework or controlled rejection rule and mandatory timing recheck after intervention are not publicly itemised.
- Testing/inspection and final-testing language are now public, but the complete completed-watch functional checklist and formal final pass/fail release authority are not.
- Serial-number or controlled-batch final-QC traceability is not publicly stated; production pressure-test method/scope/location also remains unstated for the 150m/200m families.
Documented factual findings attached to this route
Clemence states that Munro and Photic MKII are assembled by hand in Britain.
Britain; exact current watchmaker/site not publicly itemised on the reviewed model pagesClemence publishes three-position regulation to a minimum +/-12 seconds/day; the post-casing sequence and regulation location require confirmation.
Not publicly stated at sufficient process depthClemence documents testing/inspection of current watches in its British-led production route; the complete final-test checklist is not public.
British production route; exact test station and sequence not publicly itemisedIdentifiable evidence supporting this route
Source ledger
What this record rests on
Named public sources and public-safe disclosures of confidential reliance are shown without exposing private evidence. The letter is the methodology evidence band, not a product-quality score.
Current official philosophy page stating that watches are designed and assembled in Britain, tested with precision and handled from design through final testing.
Clemence WatchesCurrent Munro editorial/product page stating that the watch is assembled by hand in Britain, rigorously tested and carefully inspected.
Clemence WatchesCurrent Munro product page stating British hand assembly and a Miyota 9039 regulated in three positions to a minimum ±12 seconds/day.
Clemence WatchesCurrent Photic MKII detail page describing British precision/small-batch assembly and field testing.
Clemence WatchesCurrent Photic MKII page showing an open pre-order for the next Q4 2026 production run, British hand assembly and three-position ±12 seconds/day regulation.
Clemence Watches